New Jersey cost guide

Well Pump Replacement Cost in New Jersey (2026)

Angi's 2026 US average to replace a well pump is $1,897; most homeowners pay $973 to $2,822. In New Jersey, only a licensed pump installer or well driller may replace it, not a plumber on a plumbing licence alone (NJDEP, October 13, 2026).

Rows of new well pumps mounted on small blue tanks, lined up outdoors next to their shipping boxes
New well pumps delivered to Pearlington, Mississippi, in October 2005, after Hurricane Katrina destroyed many well pumps there. Image: Mark Wolfe, FEMA, public domain, via Wikimedia Commons. It shows the subject, not a New Jersey job.
Well pump replaced, US average
$1,897; most pay $973 – $2,822 · Angi, national, updated Aug 31, 2026
Submersible pump, by type
$1,000 – $2,500+ · Angi, national, Aug 31, 2026
Shallow or deep well jet pump
$450 – $1,500 shallow; $800 – $2,200+ deep · Angi, national, Aug 31, 2026
Pump in a 100 – 200 ft well, installed
$1,500 – $3,000 (300 – 400 ft: $2,800 – $5,500) · The Well Guide, national, Mar 2026
Labor to pull and set the pump
$250 – $1,000 ($45 – $150 an hour) · Angi, national, Aug 31, 2026
Pressure tank replaced, Sussex County, NJ
$600 – $1,400 · Superior Well & Pump, Sparta, NJ, read Oct 22, 2026
One company's real invoices (Wisconsin)
Middle half $4,500 – $7,500 · Team Austin, WI, updated Oct 15, 2026
NJ well water test when a home is sold
$1,200 – $1,500 average (State estimate) · NJDEP Private Well Testing Act page, read Oct 22, 2026

No New Jersey agency publishes well pump prices, and the New Jersey well companies we checked quote after seeing the well, so the replacement figures are national or out-of-state market ranges, labelled as such. Every figure was read on October 22, 2026 and is named to its source below.

Last updated October 22, 2026. LA Trusted Partners routes home service requests to independent providers after your consent — it does not install, repair or price well pumps, and it does not arrange well pump work. Every price below comes from a cited published source, with the date it shows or the date we read it. The licensing rules come only from NJDEP's own rule text and advisory.

What a Well Pump Replacement Costs in 2026, and Why New Jersey Prices Are Hard to Find

Angi's August 31, 2026 update puts the national average at $1,897, with most homeowners paying $973 to $2,822, from 1,339 verified projects. By type, it lists $1,000 to $2,500+ for a submersible pump, $450 to $1,500 for a shallow jet pump, $800 to $2,200+ for a deep well jet pump and $1,300 to $4,000+ for a constant-pressure pump. The Well Guide (March 2026) puts most replacements at $1,500 to $4,000 fully installed.

Real invoices run higher than the survey averages. Team Austin, a Wisconsin company, says the middle half of its pump-only replacements from 2024 through August 2026 finished at about $4,500 to $7,500. Southeast Plumbing & Well Pumps in Brewster, New York lists $1,800 to $5,650 for a pump and pressure tank.

New Jersey is harder. No New Jersey agency publishes well pump prices. DPS Well Pumps & Water Systems in North Jersey says it gives an upfront price before any work, and D.N. Drilling in Vineland repeats the national ranges and quotes after a look at the well. The one New Jersey figure we found published is for pressure tanks: Superior Well & Pump in Sparta lists $600 to $1,400 for most tank replacements in Sussex County. The Well Guide estimates the Northeast, New Jersey included, at 15% to 30% above the national average; that is its estimate, not a New Jersey survey.

Published well pump replacement price benchmarks, national, out-of-state and New Jersey, 2026
SourcePublished figureWhat it coversDated
Angi, national$1,897 average; most pay $973 – $2,822Well pump replacement, from 1,339 verified projects reported by Angi pros. Pipework and wiring repairs add $250 – $1,000 in labor.Updated August 31, 2026
The Well Guide, national$1,500 – $4,000 fully installed; about $1,900 averagePump, drop pipe, wiring and labor. Says every 100 feet of depth adds roughly $500 – $1,000, and puts the Northeast, New Jersey included, 15% to 30% above the national average.Updated March 2026
Southeast Plumbing & Well Pumps, Brewster, NY$1,800 – $5,650 for a pump and pressure tankShallow jet pump with tank $900 – $2,000; deep submersible over 100 feet $2,000 – $8,000, especially with a constant pressure system.Undated; read October 22, 2026
Team Austin, WisconsinMiddle half of its 2024 – 2026 jobs: $4,500 – $7,500Pump-only replacements with normal truck access. Hand-pulled pumps $5,600 – $8,800; pump and pressure tank together $6,700 – $9,000. Its own invoices, not a survey.Updated October 15, 2026
Superior Well & Pump, Sparta, NJ$600 – $1,400Most residential pressure tank replacements in Sussex County, by tank size, type and labor. No pump price published.Undated; read October 22, 2026
D.N. Drilling, Vineland, NJQuotes the national rangesA South Jersey well company whose cost article repeats Angi and HomeGuide figures and quotes each job after an on-site look.August 24, 2026

Ranges are the linked sources' own published figures, each read live on October 22, 2026. Your price depends on the well's depth, the pump, what else comes out of the well and the company. Treat these as a comparison baseline, not a promise.

Well Pump Cost by Pump Type and Well Depth

Depth drives the price. A deeper well needs a stronger pump, more drop pipe and wire, and more time on the hoist. The Well Guide says every 100 feet adds roughly $500 to $1,000, and that pulling a pump from 400 feet takes a two-person crew with a cable hoist truck and 4 to 8 hours. Angi's own depth bands show the same climb.

Your well's depth is on its well record. NJDEP keeps well permits and well records, the as-built description of the well, for wells drilled after 1946; you can search them through the Well Permits page (DEP DataMiner, WS Well Permits reports) or ask the Bureau with its Individual Well Search Questionnaire.

Well pump replacement cost by pump type and well depth, The Well Guide and Angi
System and well depthInstalled costSource
Shallow well jet pump, under 25 feet$800 – $1,800The Well Guide, March 2026
Deep well jet pump, 25 – 100 feet$1,200 – $2,500The Well Guide, March 2026
Submersible pump, 100 – 200 feet$1,500 – $3,000The Well Guide, March 2026
Submersible pump, 200 – 300 feet$2,000 – $4,000The Well Guide, March 2026
Submersible pump, 300 – 400 feet$2,800 – $5,500The Well Guide, March 2026
Submersible pump, 400 feet or deeper$4,000 – $8,000+The Well Guide, March 2026
Constant pressure (variable speed) systemAdd $800 – $2,000The Well Guide, March 2026
Well under 25 feet, pump cost$400 – $3,000+Angi, August 31, 2026
Well 25 – 150 feet, pump cost$1,200 – $5,500+Angi, August 31, 2026
Well over 150 feet, pump cost$2,000 – $10,000+Angi, August 31, 2026

The Well Guide figures are installed totals for scheduled weekday work. Angi's depth figures are pump costs before pipework or wiring. Both national.

What a Well Pump Quote Should List, Line by Line

A single number on a quote hides the parts that move the price. The Well Guide says a complete quote for a submersible pump lists the pump, the drop pipe, the wire, the control box, the pitless adapter and cap, and the labor, and that some quotes leave the pipe and wire off and add them later. Ask for each line.

Diagram of a simple well water system: a pump down in the well, a pressure switch wired to the power supply, a pressure tank, and the line to the house water supply
The parts a well pump job touches: the pump in the well, the pressure switch that turns it on and off, and the pressure tank. In New Jersey the pump, the tank and the line between the well and the tank are licensed pump installer work (N.J.A.C. 7:9D). Image: PAR, CC0, via Wikimedia Commons. It shows the subject, not a New Jersey job.
Well pump replacement quote line items with published figures
Line on the quoteWhat it isPublished figureAsk before you say yes
PumpThe motor and pump at the bottom of the well (submersible) or in the basement (jet pump)$300 – $1,500 for the pump alone (The Well Guide)What horsepower and gallons per minute, and why that size for your well?
Drop pipeThe pipe that carries water from the pump up the well$1 – $3 a foot of depth (The Well Guide)Is the old pipe being replaced, and is it on this quote?
WireThe power cable from the pump to the surface$1 – $3 a foot (The Well Guide)Is new wire included, or reused?
Control boxAbove-ground box on three-wire pumps with the start capacitor and relay$100 – $400 (The Well Guide)Does your pump have one, and does it need replacing?
Pitless adapter and well capThe fitting where the water line leaves the casing below the frost line, and the cap on top$50 – $200 for both (The Well Guide)Is the cap a sealed sanitary cap?
LaborPulling the old pump and setting the new one, often with a hoist truck$250 – $1,000; $45 – $150 an hour (Angi)Is the price fixed, or by the hour?
Pressure tankThe tank that stores water under pressure so the pump does not start at every tap$600 – $1,400 in Sussex County (Superior Well & Pump)Was the tank tested, and what did the test show?
DisinfectionChlorinating the well after it has been openedNo price in Angi or The Well GuideIs it included, and is a water test after it included?

Six checks before anyone pulls the pump

  • Ask for the licence. New Jersey requires a licensed pump installer or well driller of the proper class, or someone working under one on site. Ask for the licence number, and check the name against the State's list.
  • Ask for the line items, not one lump sum. The Well Guide says some quotes leave out drop pipe and wire and add them later.
  • Ask what was tested. A pressure switch or control box can fail while the pump is fine; get the reason the pump itself is being replaced.
  • Ask about the tank on the same visit. Angi's expert, a journeyman plumber, says replacing only one part of a combined pump-and-tank system is not cost-effective, and D.N. Drilling in Vineland tests the tank on every pump quote.
  • Ask about after-hours rates. The Well Guide says weekend or emergency service adds 25% to 50% to the labor.
  • Ask who disinfects the well afterwards. New Jersey's rule lets a licensed pump installer disinfect well pumping equipment (N.J.A.C. 7:9D-1.7(b)).

Who Is Allowed to Replace a Well Pump in New Jersey

New Jersey's well rules are stricter than most homeowners expect. N.J.A.C. 7:9D-1.6(c) says no person shall install, repair, remove, alter or replace a well pump or well pumping equipment, or engage in that business, without being a New Jersey licensed pump installer or well driller of the proper class, or being on site under the supervision of one. The rule defines pump installing to include the connecting lines between the well and the storage tank, and lets a licensed pump installer install, maintain, disinfect, winterize or replace pumping equipment and storage tanks (N.J.A.C. 7:9D-1.5 and 1.7(b)).

On October 13, 2026, NJDEP issued Compliance Advisory #2026-07. It says the Department is aware of pump installation and repair being done by unlicensed individuals, "including but not limited to licensed plumbers, laborers and property owners," and that the plumbing code's jurisdiction begins at the main water supply valve after the private well system (DCA Bulletin 88-10). NJDEP's private well owner FAQ says the same in plain words: licensed plumbers and other contractors are not authorized to work on wells, well pumps or well equipment between the well and the main shutoff valve.

So a plumber's quote for a well pump is only good if that plumber also holds the State pump installer or well driller licence, or the work is supervised on site by someone who does. NJDEP's Well Permits page counts about 530 licensed well drillers and 150 licensed pump installers in the State.

Check the licence

Ask for the licence number. NJDEP keeps lists of licensed individuals and drilling companies under Online Reports on its Well Permits page (WS Well Permits reports). The rules require the licence to be on site and shown to any State, county or local official who asks (7:9D-1.6(f)).

Look at the truck

The person or well company doing pump work has to display its name on the trucks and large equipment it uses (7:9D-1.6(c)). An unmarked crew is a reason to ask more questions.

Questions or a problem

The advisory names NJDEP's Bureau of Water Allocation and Well Permitting (Wellpermitting@dep.nj.gov, 609-984-6831) for questions, and a Well Permitting Complaint Form for pump work not done or overseen by a licensed installer.

Should the Pressure Tank Be Replaced With the Pump?

The pressure tank stores water under pressure so the pump does not start every time a tap opens. When it loses its air cushion, the pump starts and stops too often, and that wears the pump. Angi's expert, a journeyman plumber, says that on a combination pump-and-tank system it is not cost-effective to replace one part and not the other, and that a pump kicking on whenever water runs points to a bad tank.

Prices: Superior Well & Pump in Sparta lists $600 to $1,400 for most residential tank replacements in Sussex County. Southeast Plumbing & Well Pumps in New York lists $800 to $3,800 for the tank, and Team Austin in Wisconsin says the middle half of its pump-and-tank jobs finished at $6,700 to $9,000. D.N. Drilling says tanks last roughly 5 to 15 years and pumps 8 to 15, so an old pump often sits under an old tank, and it tests the tank on the same visit.

In New Jersey the tank and the line from the well to it are licensed pump installer work under N.J.A.C. 7:9D, the same as the pump.

A tall galvanized steel water pressure tank in a utility room, with a pressure gauge on its side and a pressure switch on the pipe at its base
An older steel pressure tank with its gauge and pressure switch. Most newer tanks use a bladder to keep the air and water apart; when that air cushion is lost, the pump starts too often. Image: KVDP, public domain, via Wikimedia Commons. It shows the subject, not a New Jersey job.

Well Pump Repair or Replacement: Where the Line Sits

Many no-water calls end in a repair, not a new pump. A pressure switch, a control box or a capacitor sits above ground and costs a fraction of a pump. D.N. Drilling in Vineland, quoting national cost guides, lists the figures in the table below and says it tests power, the switch, the tank pressure and the gauge before it quotes.

Once the pump has to come up out of the well, most of the replacement labor is already being paid. That is why an older pump that has failed down the well is usually replaced rather than rebuilt. Two New Jersey companies put a pump's life at roughly a decade or more: Henderson Well & Pump in Vernon says many last about 10 to 15 years, and D.N. Drilling says 8 to 15.

A disassembled well pump with its impeller removed, both covered in heavy rust-colored mineral deposits
A pump taken apart after it seized. The photographer notes the heavy mineral deposits probably stopped the impeller from turning. Image: Matt, public domain, via Wikimedia Commons. It shows the subject, not a New Jersey job.
Well pump repair costs by part, with sources
PartWhat failsPublished figureSource
Pressure switchThe switch that turns the pump on and off by pressure$50 – $150D.N. Drilling, Vineland, NJ, quoting national guides, Aug 24, 2026
Capacitor or control boxAbove-ground electrical parts on three-wire pumps$150 – $600D.N. Drilling, quoting national guides
Wiring and electrical workDamaged wire or connections$162 – $525D.N. Drilling, quoting national guides
Pull and reset the pump, laborWhen the pump has to come up but is not replaced$250 – $800D.N. Drilling, quoting national guides
Pressure tank, installedWaterlogged tank or failed bladder$600 – $1,400 in Sussex CountySuperior Well & Pump, Sparta, NJ
Pump replacedA failed motor or worn pump down the well$973 – $2,822 (most homeowners)Angi, Aug 31, 2026

Signs the pump may be failing

  • Low or no water at the taps (Angi).
  • The pump runs non-stop, or runs longer than usual after water use (Angi; NJDEP).
  • New noises from the pump or a change in how it sounds (Angi; NJDEP).
  • Higher electric bills than usual (Angi).
  • Sediment, cloudiness, discoloration or a new taste in the water (Angi; NJDEP).
  • Air spitting from the faucets (Angi).

Not always the pump

NJDEP warns that the same signs can mean the well itself is running low, especially in a dry spell. A licensed well driller or pump installer can test whether it is the water level or an electrical or mechanical fault in the pump. If the water level has dropped, NJDEP says the pump can sometimes be lowered further into the water, and a bedrock well can sometimes be deepened.

No Water Right Now: What to Do First

Call a licensed pump installer or well driller and tell them the well's depth if you know it, the pump type, its age, and what you noticed before the water stopped. NJDEP's private well owner FAQ warns that opening the well can let contamination in, and that putting a measuring device down it can leave an object lodged between the pump and the casing, which complicates pulling the pump later.

Ask the price before the truck leaves the shop, including any after-hours rate. The Well Guide says weekend or emergency service adds 25% to 50% to the labor. If water is leaking inside the house after the main shutoff valve, that part is plumbing; our emergency plumber page covers it.

Buying or Selling a Home With a Well in New Jersey

About 12% of New Jerseyans, roughly 1.1 million people, rely on a private well for drinking water (NJDEP). When one of those homes is sold, the Private Well Testing Act requires the untreated well water to be tested for up to 43 parameters, and the closing cannot happen until both the buyer and the seller have received the results and signed that they have read them. Landlords must test every five years and give each tenant the results.

NJDEP estimates the average test at $1,200 to $1,500, with possible extra cost for the field blanks required for PFAS and volatile organic compounds. Who pays is negotiated in a sale; the landlord pays for a rental. Mercury is required only in nine South Jersey and shore counties, and uranium only in twelve North and Central Jersey counties. A pump that fails during a sale is a separate repair; the test covers water quality, not the pump.

Does Homeowners Insurance Cover a Well Pump?

Usually not when it simply wears out. Policygenius (March 18, 2021) says homeowners insurance may cover a well pump damaged by a covered peril such as fire, lightning, a windstorm or a falling tree, but not normal wear and tear, age, maintenance problems, or mechanical or electrical breakdown.

Some insurers sell an equipment breakdown add-on. Progressive (July 3, 2025) says this optional coverage does not cover wear and tear and is not available on all policies, and Chubb lists well pumps among the home equipment its Equipment Breakdown coverage includes. What applies to you is in your own policy, so ask your agent before the pump is replaced.

How LA Trusted Partners Fits Into a Well Pump Job

This page is research

LA Trusted publishes this cost guide so you can budget from published figures and check who may legally do the work. It does not install or repair well pumps, sets none of the prices above, and guarantees no work.

The request is consent-first

You describe the problem and the town. Your contact information is shared with a matched independent provider only after you agree to the disclosure.

The provider owns the work

The diagnosis, the quote, parts, labor and any warranty come from the independent provider. LA Trusted's standards ask that a provider's business identity and service area be checkable, and that licensing where applicable, insurance evidence and complaint history be checked before routing.

Request a Plumbing Match in New Jersey

This request is for plumbing inside the house, after the main water shutoff: leaks, fixtures, a water heater, drains. Tell us who you are, where the property is and what is happening. LA Trusted does not arrange well pump, pressure tank or well work, because New Jersey requires a licensed pump installer or well driller for it; use the licence lists above to choose one yourself. If you cannot tell whether the problem is the well or the house plumbing, say so in the request and we will tell you whether we can match it.

Coverage depends on the town and the job. LA Trusted does not do the work itself and does not promise a response time, so the quote and any warranty come from the provider who calls you. Ask for the total, including any diagnostic fee.

Already have a well pump quote? Check it line by line. The plumbing request page takes the same request.

Who you are
What you need
Anything else?

LA Trusted Partners is a referral network, not the contractor. Our independent providers pay us for marketing and software services, and you're always free to choose whether to hire them.

Well Pump Replacement Cost in NJ: Frequently Asked Questions

How much does it cost to replace a well pump in New Jersey?

No New Jersey agency publishes well pump prices, and the New Jersey well companies we checked quote after a look at the well. The national figures are the best published baseline: Angi's 2026 average is $1,897, with most homeowners paying $973 to $2,822 (updated August 31, 2026). The Well Guide puts most replacements at $1,500 to $4,000 installed and estimates the Northeast, New Jersey included, at 15% to 30% above the national average (March 2026).

Can a plumber replace a well pump in New Jersey?

Not on a plumbing licence alone. New Jersey's well rules say no person shall install, repair, remove, alter or replace a well pump or well pumping equipment without being a licensed pump installer or well driller of the proper class, or working on site under one (N.J.A.C. 7:9D-1.6(c)). NJDEP's Compliance Advisory #2026-07, issued October 13, 2026, says it is aware of this work being done by unlicensed people, including licensed plumbers. The plumbing code starts at the main water supply valve after the well system.

How do I check a well pump installer's licence in New Jersey?

NJDEP keeps lists of licensed well drillers, pump installers and drilling companies. Its private well owner FAQ says to open the Online Reports link on the Well Permits and Information page and choose the WS Well Permits reports. The rules also require the installer to carry the licence on site and show it to any State, county or local official who asks (N.J.A.C. 7:9D-1.6(f)), and to display the company name on the trucks and equipment used (7:9D-1.6(c)).

Is a well pump covered by homeowners insurance?

Usually not when it simply wears out. Policygenius says homeowners insurance may cover a well pump damaged by a covered peril such as fire, lightning or a windstorm, but not wear and tear, old age, or mechanical or electrical breakdown. Some insurers sell an equipment breakdown add-on: Progressive says it does not cover wear and tear, and Chubb lists well pumps among the equipment its version covers. Read your own policy.

How much does it cost to replace a well pump and pressure tank?

Southeast Plumbing & Well Pumps in Brewster, New York publishes $1,800 to $5,650 for a pump and pressure tank. Team Austin in Wisconsin says the middle half of its pump-and-tank jobs finished at $6,700 to $9,000. In New Jersey, Superior Well & Pump in Sparta publishes $600 to $1,400 for most pressure tank replacements in Sussex County. Each read October 22, 2026.

How much does a pump for a 200 ft well cost?

The Well Guide puts a submersible pump in a 100 to 200 foot well at $1,500 to $3,000 installed, and in a 200 to 300 foot well at $2,000 to $4,000 (March 2026). Drilling a new well is a different job: in New Jersey it needs a well permit, obtained by a licensed well driller, before the well is drilled (N.J.A.C. 7:9D-1.6(b)).

When should you replace a well pump?

When a licensed installer has tested the switch, the control box and the tank and the pump itself is the problem. Signs Angi lists include low or no water, a pump that runs non-stop, new noises, higher electric bills, sediment and air in the lines. NJDEP adds that a pump running longer than usual can also mean the well is running low, which a licensed driller or pump installer can test.

How much does well pump repair cost?

Less than a replacement when the failed part is above ground. D.N. Drilling in Vineland, quoting national cost guides, lists $50 to $150 for a pressure switch, $150 to $600 for a capacitor or control box and $250 to $800 in labor to pull and reset a pump (August 24, 2026). Get the diagnosis in writing before you agree to a new pump.

How long does a well pump last?

Two New Jersey well companies put it at roughly a decade or more: Henderson Well & Pump in Vernon says many last about 10 to 15 years, and D.N. Drilling in Vineland says most last 8 to 15 years. Both tie a pump's life to its water conditions and use.

Do I need a permit to replace a well pump in New Jersey?

The State rule we read ties the well permit to drilling, constructing, installing or replacing the well itself (N.J.A.C. 7:9D-1.6(b)); it does not list a separate State permit for swapping the pump. Your town may still require a local permit, for example for the electrical work. Ask the licensed installer and your local construction office before work starts.

Do I have to test the well water when I sell a house in New Jersey?

Yes, if the home gets its drinking water from a private well. Under the Private Well Testing Act, the untreated water must be tested for up to 43 parameters, and the closing cannot happen until both the buyer and the seller have received the results and signed that they have read them. Landlords must test every five years and give tenants the results (NJDEP).

How much does the New Jersey well water test cost?

NJDEP estimates the average Private Well Testing Act test at $1,200 to $1,500, with possible extra cost for field blanks for PFAS and volatile organic compounds. In a sale, the buyer and seller negotiate who pays; for a rental, the landlord pays.

Sources used on this page

Every source in this list was checked live, and every figure taken from it re-read, on October 22, 2026. Naming a company here is not an endorsement and does not mean it is an LA Trusted Partners provider.

A leak or a fixture inside the house?

Start with one documented plumbing request. You stay in control of whether your information is shared with a matched independent provider. For the well pump itself, hire a New Jersey licensed pump installer or well driller and check the licence first.